Creating Your Own Screen Logo - Epson EX90 User Manual

Creating Your Own Screen Logo

You can transfer any image on your computer to the projector, and
then use it as the startup screen and/or the screen that is displayed
when you press the
A/V Mute
logo, slogan, photograph, or any other image you want to use. The
projector considers this image the "User's Logo."
Follow these steps to capture the image and transfer it to the projector:
1. Display the image you want to use on the projector. You can use
an image from either a computer or video source, such as a DVD
player.
2. Press the button and select the
Menu
3. Use the down arrow button and press
.
Logo
4. When you see a message asking if you want to use the present
image as a user's logo, select
displays over the image.
5. Use the arrow buttons on the projector or remote control to select
the area of the image you want to use. Once you have selected the
area, press .
Enter
6. When you see the message
press . If you want to change the area selected, select
Enter
press and repeat steps 5 and 6.
Enter
button. The image can be a company
Extended
to select
Enter
and press . A selection box
Yes Enter
, choose
Select this image?
menu.
note
If the User's Logo Protect
function is
message that the logo cannot
be recorded. You'll need to
disable the User's Logo
Protect function before you
can create or change the
User's Logo. See page 69.
User's
and
Yes
,
No
Fine-tuning the Projector
, you see a
On
67