Epson Stylus Photo R310 Service Manual page 10

EPSON Stylus Photo R300/R310
Maintenance
Printer status
LED indication
Error before ink
Blink
replacement Cleaning
Ink Low Condition Blink
TROUBLESHOOTING
Table 1-3. LED/LCD Indication and STM3
LCD indication
Ink Cartridge cannot be recognized.
Yellow: T0484
For best result, use genuine EPSON
ink.
(Blink of Ink Cartridge Icon)
Troubleshooting with LED/LCD Indications and Status Monitor 3 Message
STM3 message
Note :
Printing operation can be performed until it becomes ink
end condition even after the error message is displayed on
STM3. However, the Head Cleaning operation may not be
performed due to the Ink Low condition.
Revision A
Condition for error detection
This error is detected when replacing the Ink
Cartridge, if the new cartridge is defective.
This error is detected when the ink consumption
reaches about 90%.
(Note)
When the Ink Low Condition is detected, the
Maintenance LED will blink. The printer will
continue to keep this LED status even if a new
Ink Cartridge is installed in the Ink Cartridge
replacement position. However, this LED status
will be reset (LED off) when "Carriage Unit"
returns to the home position.
10