Download Print this page

Epson Stylus Photo R310 Service Manual: Removing Housing, Middle

Color inkjet printer.
Hide thumbs

Advertisement

Stylus Photo R300/R310

2.3.3 Removing Housing, Middle

External View
Cover, Core
C.B.P 3x8
(4-6kgf•cm)
Panel FFC
Ferrite Core
Cover, Ink Tube
Hook
Two-sided Tape
Slots and Hook
Housing, Lower
Figure 2-6. Removing "Housing, Middle"
DISASSEMBLY AND ASSEMBLY
Housing, Middle
C.B.S 3x8 (6-8kgf•cm)
Hook
1
2
C.B.P 2.5x8
(3-5kgf•cm)
C.B.P 3x8 (4-6kgf•cm)
Parts/Units which should be removed before removing "Housing, Middle"
Paper Support Assy./Housing, Upper
Procedure for Removing
1.
Remove the screw which secures "Cover, Core" and then remove "Cover,
Core".
2.
Pull out "Panel FFC" from "Ferrite Core".
3.
Take off the two-sided tape which secures "Panel FFC" from "Housing,
Middle". Then, release "Panel FFC" from the hooks (x2) of "Housing,
Middle".
4.
Remove the screw which secures "Cover, Ink Tube", release the hook and
then remove "Cover, Ink Tube".
5.
Remove the screws (x4) which secure "Housing, Middle".
6.
Lay down the printer backward, put a flat-blade screwdriver or alike into the
slot located on the bottom surface of "Housing, Lower" and then release the
hooks (x2) which secure "Housing, Middle".
Do not damage the hooks of "Housing, Middle" with the flat-blade
screwdriver or alike.
7.
Lift "Housing, Middle" upward and remove it.
Disassembly
Revision A
41

Advertisement

Troubleshooting

   Related Manuals for Epson Stylus Photo R310

This manual also for:

Stylus photo r300

Comments to this Manuals

Symbols: 0
Latest comments: