Lubrication - Epson Stylus Photo R310 Service Manual

EPSON Stylus Photo R300/R310

4.1.3 Lubrication

The lubrication used for the components of Stylus Photo R300/R310 has been decided
on based on evaluation carried out by Epson. As a result, the specified amount of
lubricant should be applied in the places specified when carrying out repair and
maintenance work.
When wiping off the grease during the cleaning
If necessary when performing assembly/disassembly of the printer
Never use oil or grease other than those specified in this manual.
Use of different types of oil or grease may damage the
components or affect the printer functions.
Never apply a larger amount of oil or grease than specified in this
manual.
Table 4-1. Oil Applied to Stylus Photo R300/R310
Type Name
G-26
Grease G-46
G-63
When using G-64, it is recommended to use a flux dispenser
(1049533) together.
MAINTENANCE
EPSON Code Supplier
1080614
1039172 EPSON
1218320
Overview
Refer to the following figures for the lubrication points.
Grounding Spring, PF Paper Guide, Rear
1
2
Roller, PF
Bushing, 5 left
Bushing, 5 right
Revision A
<Lubrication Point>
1. Contact point between
"Grounding Spring, PF" and
"Roller, PF"
2. Surface of contact point
between "Roller PF" and
"Paper Guide, Rear"
<Lubrication Type>
1. G-26
2. G-26
<Lubrication Amount>
1. Half periphery of "Roller, PF"
2. 4mm x 2 points
<Remarks>
Use a syringe to apply it
<Lubrication Point>
Inside surface of "Bushing, 5"
(Roller EJ Assy.)
<Lubrication Type>
G-26
<Lubrication Amount>
Adequate dose
<Remarks>
Use a cotton-tipped swab to apply
it
95