Cut Sheet Presenter Module; Paper Guide, Upper - Epson EU-T432 Technical Manual

Confidential

Cut Sheet Presenter Module

1. Put your fingers on the top and bottom of the cut sheet presenter module; then pull the
module up at an angle (in the direction of arrow B) to slide it.
2. Pull the module until the mounting dowels on both sides of the module are disengaged;
then turn the module downward and open it.
3. To close the module, lift up the bottom of the paper exit and slide it back to the original
position. At this time, make sure that the mounting dowels (on both sides) are securely
engaged with the mounting parts on the cut sheet presenter module.

Paper guide, upper

To open the paper guide, upper, lift up the knob on the right edge of the paper guide.
plate, opening and shutting
paper guide, upper
lever, platen
Opening andClosing of
the platen unit
mounting dowels
Rev. A
tab
Figure 3-2 Opening/closing units and module
EU-T432 Technical Manual
Opening/ Closing of
A
the paper roll supply module
Opening/ Closing of
the paper guide, upper
B
paper exit
cut sheet presenter module
paper roll supply module
frame, open lever
Opening/ Closing
of the cut sheet
presenter module
Handling 3-5