Troubleshooting With Led/Lcd Indications And Status Monitor 3 Message - Epson Stylus Photo R310 Service Manual

EPSON Stylus Photo R300/R310

1.2 Troubleshooting with LED/LCD Indications and Status Monitor 3 Message

This section describes the LED/LCD indication, the STM3 message and the error condition when the printer detects an error in each operation such as the power on, the paper
loading/feeding and the ink absorption operation.
Maintenance
Printer status
LED indication
Communication Error --
Error before Initial Ink
Blink
Charge
TROUBLESHOOTING
Table 1-3. LED/LCD Indication and STM3
LCD indication
--
Ink Cartridge cannot be recognized.
Yelolow: T0484
For best result, use genuine EPSON
ink.
Troubleshooting with LED/LCD Indications and Status Monitor 3 Message
STM3 message
This error is detected when the printer cannot
communicate with the PC properly.
This error is detected when a defective cartridge
is installed in the printer which the Initial Ink
Filling is not done yet.
Revision A
Condition for error detection
9