Epson Stylus Photo R310 Service Manual page 48

Stylus Photo R300/R310
When having replaced "Main Board", implement the
adjustment in the following order. (Refer to Chapter 3
"ADJUSTMENT")
When possible to read data from the old board
1. EEPROM data copy
When impossible to read from the old board
1. Replace "Waste Ink Pads" with new one.
(To count the amount of the waste ink)
2. Market Setting
3. USB ID Input
4. Waste Ink Pad Counter
5. Head ID Input
6. First Dot Adjustment
7. PW Sensor Adjustment
8. Head Angular Adjustment
9. Bi-D Adjustment
10. Offset Input for CR Motor Calorific Limitation
DISASSEMBLY AND ASSEMBLY Disassembly
Revision A
48