Stylus Photo R300/R310
External View
E Ring
Holder, Scale Left
Flat Washer
Leaf Spring
E Ring
Flat Washer
Spring Washer
Hooks
Cable, Head
Holder, Shaft
Assy.
Hooks
Figure 2-30. Removing "Carriage Unit" (2)
DISASSEMBLY AND ASSEMBLY
Bushing,
Holder, Scale, Right
Parallel
Adjust, Right
C.P.S (P4) 3x6
(6-8kgf•cm)
Fixed Spring,
CR Shaft,
Right
Cam, CR,
Right
Hook
E Ring
CR Guide Shaft
CR Guide Shaft
Cam, CR, Left
9.
Remove the E ring, "Holder, Scale Right" and "Cam, CR, Right" from the
right side of "CR Guide Shaft".
10. Remove the screw which secures "Bushing, Parallel Adjust, Right", Then,
remove "Bushing, Parallel Adjust, Right".
11. Remove "Fixed Spring, CR Shaft, Right" from the hook of "Frame, Main".
Remove "Fixed Spring, CR Shaft, Right" from "CR Guide Shaft".
12. Remove the E ring, the flat washer and the leaf spring which secure "Holder,
Scale, Left".
13. Remove the E ring, the flat washer and the spring washer from the left side of
"CR Guide Shaft". Then, remove "Holder, Scale, Left"
14. Release "Cable, Head" from the hooks (x7) of "Holder, Shaft Assy.".
15. Slide "CR Guide Shaft" to the right and pull it out from "Cam, CR, left".
Then, remove "Carriage Unit" and "CR Guide Shaft" together.
16. Pull out "CR Guide Shaft" from "Carriage Unit".
Disassembly
Revision A
58