Epson Stylus Photo R310 Service Manual page 73

Stylus Photo R300/R310
Set all of the gears on the shaft of "Pump Frame" correctly,
and then check if they move smoothly.
Make sure that the ink tube is not squashed or pressed.
Install the ink tube to the grooves (x2) at the bottom surface
of "Cap Frame".
Figure 2-53. Installing Point for the ink tube
Reinstalling "Ink System"
Check if "Pump Assy." is correctly secured.
Do not let "Lever, Change", "Combination Gear, 27.2,
19.2", "Spur Gear, 27.2" and "Combination Gear, 20.82,
24" drop and break them.
DISASSEMBLY AND ASSEMBLY Disassembly
Revision A
73