Disassembly - Epson Stylus Photo R310 Service Manual

Stylus Photo R300/R310

2.3 Disassembly

The following flowchart shows the order of disassembling procedure. When disassembling any unit, refer to the page number shown in the flowchart.
START
Removing Paper
Support Assy.
(2.3.1 P.38)
Removing Housing, Upper
(2.3.2 P.39)
Removing Housing, Middle
(2.3.3 P.41)
Removing Main Board
(2.3.7 P.46)
Removing ASF Assy.
(2.3.8 P.49)
Removing Holder,
Shaft Assy.
(2.3.9 P.51)
Removing Printer
Mechanism/Housing,
(2.3.15 P.64)
Lower
Removing Carriage
Unit
(2.3.13 P.57)
Removing CDR Guide
Assy.
(2.3.17 P.69)
Removing Paper Guide,
Front/Roller EJ Assy.
(2.3.19 P.74)
DISASSEMBLY AND ASSEMBLY
Removing Panel Board
(2.3.5 P.44)
Removing Porous Pad,
Removing Stacker Assy.
Paper Guide, Front
(2.3.6 P.45)
(2.3.4 P.43)
Removing Paper
Guide, Upper
(2.3.14 P.63)
Removing Power Supply
Removing Ink System
Unit
(2.3.18 P.71)
(2.3.16 P.68)
Figure 2-1. Removing Procedure Flowchart
Removing CR Motor
(2.3.10 P.54)
Removing PF Motor
(2.3.20 P.78)
NOTE: indicates that the procedure in the broken-line box is NOT the shortest
removing procedure, but the passing point for the next removing procedure.
NOTE: When removing 'CDR Guide Assy.' or 'Paper Guide, Front/ Roller EJ Assy.', We
have to remove Carriage Unit before removing Printer Mechanism.
Disassembly
Removing Print Head Removing APG Assy.
(2.3.12 P.56) (2.3.11 P.55)
Removing Main Board
(2.3.7 P.46)
Removing APG Assy.
(2.3.11 P.55)
Removing Carriage Unit
(2.3.13 P.57)
Revision A
37