Registering The Remote Test Id ("Remote Test Id" Setting) - Kyocera TASKalfa 181 Operation Manual

Various Settings and Registration

Registering the Remote Test ID ("Remote Test ID" setting)

Notes
•
•
1 Open the cover plate to the left and press the Register
key.
2 Press the
Parameter.
3 Press the Enter key.
4 Press the
ID.
5
Press the Enter key.
6 Use the keypad to enter the designated 4-digit Remote
Test ID.
If you want to reset the displayed number to "0000",
simply press the Stop/Clear key.
7 Press the Enter key. Registration of the Remote Test ID is complete.
If you are finished making settings, press the Reset key. The operation panel will return to the initial
mode settings.
7-18
A previously registered Remote Test ID can also be modified by performing the following
procedure.
If you want to cancel the procedure part way through, press the Reset key. The operation panel
will return to the initial mode settings.
key or the key to select Program Fax
key or the key to select Remote Test
Program:
Program encryption box
Program Encryption ID
Program Fax Parameter
Program Fax Parameter:
Fax Forwarding
Remote Switch
Remote Test ID
Remote Test ID:0000
Enter Remote ID
:55
:0000