Selecting The Automatic Reception Mode ("Receive Mode" Setting) - Kyocera TASKalfa 181 Operation Manual

Various Settings and Registration

Selecting the Automatic Reception Mode ("Receive Mode" setting)

This fax has 2 or 3 automatic reception modes (depending upon the model version). The inch
version of this fax offers the Automatic Fax Reception, Auto FAX/TEL Switching and D.R.D.
Reception modes. The metric version contains the Automatic Fax Reception and Auto FAX/TEL
Switching modes. Select from among the available modes that are available for your fax machine.
Note
If you want to cancel the procedure part way through, press the Reset key. The operation panel will
return to the initial mode settings.
1 Press the System Menu key.
2 Press the
3 Press the Enter key.
4
Press the
Mode [Reception mode].
5 Press the Enter key.
6 Press the
reception mode.
The asterisk (*) in the message display indicates the
current setting.
> D.R.D. was selected: Proceed to step 7.
> If any reception mode other than D.R.D.was selected: Proceed to step 9.
7 Press the Enter key.
8
Press the
pattern.
Select among the 4 available patterns: Normal Ring,
Double Ring, Short-Short-Long and
Short-Long-Short.
9 Press the Enter key. The setting for the reception mode is complete.
If you are finished making settings, press the Reset key. The operation panel will return to the initial
mode settings.
7-12
key to select Fax Default.
key or the key to select Receive
key or the key to select the desired
key or the key to select the desired ring
System Menu / Counter
Machine Default
Printer Default
Fax Default
Fax Default:
Scan from ADF
TX/Default
Receive Mode
Receive Mode:
Fax Reception
*
Auto Fax/Tel SW
D.R.D.
D.R.D. Ring Pattern:
Normal Ring
Double Ring
Short-Short-Long
:Std size
:Memory
:Fax Recept