Kyocera TASKalfa 181 Operation Manual page 105

Note
If you want to cancel the procedure part way through, press the Reset key. The operation panel will
return to the initial mode settings.
1
Open the cover plate to the left and press the Polling
key.
2 Press the key or the
3
Press the Enter key.
4 Enter the fax number of the transmitting party.
You can enter the fax number using the keypad,
abbreviated numbers, one-touch keys, group dial keys,
chain dial keys or the directory.
5 If you want to designate the communication for this fax
number as a Subaddress Bulletin Board Polling
Reception, press the Sub-Address key.
> If you pressed the Sub-Address key, proceed to
step 6.
> If you DID NOT press the Sub-Address key,
proceed to step 9.
6 Enter the subaddress you want to use for this
Subaddress Polling Reception.
The subaddress can be up to 20 digits in length and
can include any combination of the numerals 0 – 9.
7 Press the Enter key.
8
If necessary, enter the predetermined Subaddress
Communication password.
The password can be up to 20 digits in length and can
include any combination of the numerals 0 – 9 and the
symbols "*" and "#". You do not have to enter a
Subaddress Communication password here if you agree in advance with the transmitting party not
to use one.
If you DO NOT need to enter a Subaddress Communication password, proceed to step 9.
key to select RX Polling.
Other Features of this Fax
Polling Communication:
TX Polling
RX Polling
:
Enter Destination
Subaddress:
Enter Subaddress
Password:
Enter Your Password
20 Digits
20 Digits
5-11