Registering The Remote Test Id (Remote Test Id Setting) - Kyocera KM-C2630D Operation Manual

Registering the Remote Test ID (Remote Test ID setting)

If you have entered into a contract with an authorized service center for their Remote Diagnosis service, it is necessary to register here in
advance the Remote Test ID that they designate for you.
* A previously registered Remote Test ID can also be modified by performing the following procedure.
* If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.
1
Press the "Register" key. The Registration Select screen
will appear.
(inch)
(metric)
2
Press the "Remote Test ID" key.
(inch)
(metric)
Section 7 Various Settings and Registration
3
Use the keypad to enter the designated 4-digit Remote
Test ID.
* If you want to revise the entered number, press the " "
or " " cursor key to move the cursor to the number that
you want to change.
(inch)
(metric)
4
Press the "Confirm" key. The message display will return
to the same screen as was displayed in step 2. If you are
finished making settings, press the Reset key to return to
the initial mode.
7-15