Kyocera TASKalfa 181 Operation Manual page 174

Various Settings and Registration
Setting the Number of Rings [FAX/TEL Switching] ("Number of Rings" setting) (Inch
version only)
When a separately purchased telephone is connected to this fax machine and Auto FAX/TEL
Switching is turned ON, the number of times the fax will let the telephone ring before the Auto
FAX/TEL Switching mode engages can be set here to any number between 0 – 15. After the
number of rings designated here, if the call is from a facsimile this fax will switch to fax reception. If
other party is on the line, the telephone will begin to ring again. (See Automatically Switching
Between the Fax and a Telephone (Auto FAX/TEL Switching) on page 5-1.)
Note
If you want to cancel the procedure part way through, press the Reset key. The operation panel will
return to the initial mode settings.
1 Press the System Menu key.
2
Press the
3 Press the Enter key.
4 Press the
#Rings(AutoRX)[Nr rings-AutRX].
5
Press the Enter key.
6 Press the
times the fax will let the telephone ring.
The asterisk (*) in the message display indicates the
current setting.
If you select 0 Times, the Auto FAX/TEL Switching
mode will engage as soon as a call comes in.
7 Press the Enter key. The setting for the number of rings in the Auto FAX/TEL Switching mode is
complete.
If you are finished making settings, press the Reset key. The operation panel will return to the initial
mode settings.
7-6
key to select Fax Default.
key or the key to select
key or the key to select the number of
System Menu / Counter
Machine Default
Printer Default
Fax Default
Fax Default:
# of Rings
#Rings(TAD)
#Rings(AutoRX)
# of Rings (Auto Switch):
0Times
1Times
2Times
*
: 2Times
:10Times
: 2Times