Initiating The Fax Connection Manually (Manual Fax Transmission) - Kyocera TASKalfa 181 Operation Manual

Initiating the Fax Connection Manually (Manual Fax Transmission)

Once you are connected with the destination party, transmission can be initiated manually by
pressing the Start key.
Use this mode when you want to talk to the other party prior to actual transmission of the
documents, or when the other party must manually switch to fax reception.
Notes
•
•
1
Set the documents you want to transmit.
2
Pick up the telephone receiver or press the On-Hook
key.
If you press the On-Hook key, the On-Hook indicator
will be lit.
3
Dial the destination fax number.
4 Check whether or not you are connected to a fax machine.
> If you hear a fax tone...
You are connected to a fax machine.
Press the Start key. Fax transmission will begin.
> If the other party answers...
You are connected to a telephone.
Press the Start key at the end of the conversation to
initiate transmission. Fax transmission will begin.
5 Hang up the receiver when Communicating appears
in the message display.
Talking with the other party and/or performing Manual Fax Transmission is only possible if a
separately purchased telephone is connected to this fax machine.
If you want to cancel the procedure part way through, press the Reset key. The operation panel
will return to the initial mode settings.
Various Functions of this Fax
:0
Document:
Press START key.
3-21