Managing Information About Your Fax Communications; Checking The Result Of Each Communication (Communication Result Display); Checking The Result Of Transmissions - Kyocera TASKalfa 181 Operation Manual

6 Managing Information About Your
Fax Communications

Checking the Result of Each Communication (Communication Result Display)

You can use the message display to check certain information regarding the 50 most recent fax
transmissions and/or receptions. The communication result display lets you check the document
number, date and time, destination name, number of pages, type of communication and the result of
your communication.

Checking the Result of Transmissions

Information for up to 50 of the most recent fax transmissions can be checked in the message
display.
Note
If you want to cancel the procedure part way through, press the Reset key. The operation panel will
return to the initial mode settings.
1
Open the cover plate to the left and press the Status
key.
2
Make sure that TX result on LCD [TX result
display] is selected in the message display and
press the Enter key. Information for the most recent
transmission will be displayed.
3 Pressing the
transmission and pressing the
display back towards the most recent transmission.
4 Once you have finished checking the desired information, press the Enter key. The operation panel
will return to the initial mode settings.
If you press the
will be displayed. If this happens, press the Enter key. The operation panel will return to the initial
mode settings.
key will display the next previous
key will change the
key when the information for the oldest transmission is displayed, an exit menu
Status:
TX Result on LCD
RX Result on LCD
Edit
TX Transaction
Doc # :001
:5543
Send
03/30 13:52
P01
Ok
6-1