Registering The Remote Test Id (Remote Test Id Setting) - Kyocera KM-2540 Operation Manual

Ready for fax transmission.
Place the original & assign destination.
Dest
Address TX
Abbrev.
book setting
Basic Application Register
Registering item option screen.
Select item for register.
Fax
Dial Box
Forwarding
Location TX/RX Remote SW
Info. Restrict. dial
Date Remote
& Time Test ID
Basic Application Register
Enter Remote ID.
Remote Test ID
Enter using # key.
0000. ( 4 digits)
Various Settings and Registration
Registering the Remote Test ID (Remote Test
ID setting)
If you have entered into a contract with an authorized service center for
their Remote Diagnosis service, it is necessary to register here in
advance the Remote Test ID that they designate for you.
Note A previously registered Remote Test ID can also be
modified by performing the following procedure.
If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
1
Press the [Register] key. The Register screen will appear.
Print Report
2
Press the [Remote Test ID] key.
Encryption
key
Print Report
3
Use the numeric keys to enter the designated 4-digit Remote Test
ID.
Ba
4
Press the [Confirm] key. The message display will return to the same
screen as was displayed in step 2. If you are finished making
settings, press the Reset key to return to the initial mode.
Note If you want to revise the entered number, press the [ ]
or [ ] cursor key to move the cursor to the number that you
want to change.
6-25