Modifying The Contents Of The Communication - Kyocera TASKalfa 181 Operation Manual

Modifying the Contents of the Communication

You can modify the information relating to a scheduled communication that uses the timer.
Information can be changed, added, or the communication can be canceled completely. The actual
procedure and information available for modification is slightly different depending on the type of
communication involved. The example in the procedure below is for a scheduled Broadcast
Transmission that uses the timer. If you want to modify the information relating to other types of
communications, simply refer to this example, but follow the flow of the message display in order to
perform the actual procedure.
Notes
•
•
•
<Modifications that can be made>
•
•
•
•
•
Note
If you want to cancel the procedure part way through, press the Reset key. The operation panel will
return to the initial mode settings.
1 Open the cover plate to the left and press the Status
key.
2
Press the
press the Enter key.
3 Press the
Program/Change and press the Enter key.
If there are no communications that are using the timer
currently in memory, an error message will appear and
then the message display will return to the Edit menu.
Documents that are stored in a Confidential Box, or that were received directly into memory,
CANNOT be deleted using this procedure.
You CANNOT modify a scheduled communication that is waiting for Automatic Redialing, nor is
it possible to modify a scheduled Polling Communication.
You can enter fax numbers using the keypad, abbreviated numbers, one-touch keys, group dial
keys, chain dial keys and the directory.
Changing the scheduled start time
Adding fax numbers
Deleting fax numbers
Changing fax numbers
Turning Subaddress Communications ON/OFF
key or the key to select Edit and
key or the key to select
Various Functions of this Fax
Status
TX Result on LCD
RX Result on LCD
Edit
Edit:
Print
Immediate TX
Program/Change
3-15