Add Send Target Server Dialog Box - HP StorageWorks MPX200 User Manual

5. Set up Discovery Addressing for the software initiator:
a. Repeat Step 4 to open the iSCSI initiator Properties dialog box.
b. Click the Dynamic Discovery tab.
c. Click Add to add a new iSCSI target.
The Add Send Target Server dialog box is displayed. See
d. Enter the iSCSI IP address of the MPX200.
e. Click OK.
Figure 66 Add Send Target Server dialog box
.
86 MPX200 iSCSI configuration rules and guidelines
Figure 66 on page 86.