Add Send Target Server Dialog Box - HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual

5. Set up Discovery Addressing for the software initiator:
a. Repeat Step 4 to open the iSCSI initiator Properties dialog box.
b. Click the Dynamic Discovery tab.
c. Click Add to add a new iSCSI target.
The Add Send Target Server dialog box is displayed. See
d. Enter the iSCSI IP address of the MPX200.
e. Click OK.
Figure 54 Add Send Target Server dialog box
.
Figure 54 on page 81.
MPX200 Multifunction Router 81