Power Cord - HP StorageWorks MPX200 User Manual

5. Route the power cord:
a. Starting from the front of the rack, connect the power cord to the MPX200.
b. For the left blade, route the cord by following the gap between the chassis and the chassis
rail (see Figure
c. Repeat for the right blade.
NOTE:
The right blade requires the power cord to extend approximately 12 in. (30 cm) beyond
the front edge, due to the positioning of the socket on the PCM.

1. Power cord

Figure 16 Power cord
.
32 Installing the MPX200
16).
1
26591b