Connecting The Power Cord; Connecting The 650W Ac Power Supply (Jc680A); Connecting The 650W Dc Power Supply (Jc681A) - HP 5830 series Installation Manual

Figure 27 Removing the power supply (for the 96G model/96G TAA model)
(1) Pivot the latch up with your thumb

Connecting the power cord

Connecting the 650W AC power supply (JC680A)

1. Insert the female connector of the AC power cord supplied with the power supply into the AC-
input power receptacle of the power supply.
Use a cable tie to secure the power cord to the handle of the power supply, as shown in
2.
28.
3. Connect the other end of the power cord to an AC power outlet.
Figure 28 Connecting the 650W AC power supply (JC680A)
(1) Cable tie
(2) Tighten the cable tie to secure the power cord to the handle of the power supply

Connecting the 650W DC power supply (JC681A)

CAUTION:
(2) Pull the power supply out
24
Figure