Connecting The Power Cord - HP M2402 User Manual

Installation

Connecting the Power Cord

The internal power supply will support 100 - 240 VAC (Auto Sensing). The power
cord shipped with the router is a 120 VAC three-conductor power cord for use in
the United States and Canada. If the router is being installed outside the United
States or Canada, the appropriate power cord should be purchased.
To connect the power cord to the router:
1. Connect the power cord to the power connector on the back-side of the router.
2. Connect the power cord to a grounded voltage source.
Figure 19: Power connector
22
WARNING: To reduce the risk of electric shock or damage to the
equipment:
Do not disable the power-cord grounding-plug. The grounding plug is an
important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet that is
easily accessible at all times.
Disconnect power from the router by unplugging the power cord from
either the electrical outlet or the router.
Network Storage Router M2402 User Guide