Initiator Logs In To Mpx200 Iscsi Target, But Eva-Assigned Luns Do Not Appear On Initiator; Eva-Presented Virtual Disk Not Seen By Initiator; Iscsi Controller Properties: Ip Ports Tab - HP StorageWorks MPX200 User Manual

Figure 114 iSCSI controller properties: IP Ports tab
.
Initiator logs in to MPX200 iSCSI target, but EVA-assigned LUNs do not appear
on initiator
Solution 1: The initiator must log in to the target to which the EVA LUN was assigned.
Solution 2: The EVA LUN was assigned to a different iSCSI host than was expected.

EVA-presented virtual disk not seen by initiator

Solution: The initiator must log in to the appropriate iSCSI target. Match the virtual disk presentation
properties to the initiator's target login (Figure 115 and Figure 116).
MPX200 Multifunction Router User Guide 159