Fcip Configuration Rules And Guidelines; General Fcip Configuration Rules; Hp Continuous Access Eva 3 Site Configuration With Six Mpx200 Router Full Peer-To-Peer - HP StorageWorks MPX200 User Manual

Figure 95 HP Continuous Access EVA 3 site configuration with six MPX200 router full peer-to-peer
connectivity
.

FCIP configuration rules and guidelines

This section defines the FCIP configuration rules for using the MPX200 Multifunction Router.

General FCIP configuration rules

The following general configuration rules apply:
• All MPX200 FCIP configurations require a minimum of two gateways. These can be two MPX200s
or one MPX200 and one IP Distance Gateway (mpx110), one local and one remote, connected
through an IP network. HP does not support FCIP connectivity between other gateway models.
• FCIP is supported on GbE ports only (GE1, GE2).
• The MPX200 Multifunction Router is supported for FCIP extension with HP Continuous Access EVA
(see Storage system rules and
NOTE:
For current support, see SPOCK at http://www.hp.com/storage/spock. You must sign up for an HP
Passport to enable access.
guidelines, page 130) and XP Continuous Access.
MPX200 Multifunction Router User Guide 129