System Log; System Attack Log; Time And Sntp - Fujitsu SH-E514TR1 10 User Manual

SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual
Severity: Select the severity value of the type of information that will be logged. Options to choose from are 0
(Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings), 5 (Notifications), 6 (Informational), and 7
(Debugging).
Facility: Select the facility value here. Options to choose from are 0 to 23.
Discriminator Name: Enter the discriminator name here. This name can be up to 15 characters long.
Click Apply to accept the changes made.
Click Delete to remove the specified entry.

System Log

This window is used to view and clear the system log. The maximum number of entries that will be displayed in this
table is 1,000. The index number can go up to 90,000. When this log is full, older entries will be removed and replaced
by newer ones.
Figure 7-10 System Log
Click Clear Log to clear the system log entries displayed in the table.
Enter a page number and click Go to navigate to a specific page when multiple pages exist.

System Attack Log

This window is used to view and clear the system attack log. The maximum number of entries that will be displayed in
this table is 1,000. The index number can go up to 90,000. When this log is full, older entries will be removed and
replaced by newer ones.
Figure 7-11 System Attack Log
Click Clear Attack Log to clear the system attack log entries displayed in the table.

Time and SNTP

21