General Configuration Command Set
Setting Basic Device Properties
2.2.3.13
set time
Use this command to change the time of day on the system clock.
set time [mm/dd/yyyy] [hh:mm:ss]
Syntax Description
[mm/dd/yyyy]
[hh:mm:ss]
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the system clock to 7:50 a.m:
Matrix(rw)->set time 7:50:00
2-60 Matrix NSA Series Configuration Guide
Sets the time in:
•
month, day, year and/or
•
24-hour format
At least one set of time parameters must be entered.