Table of Contents
Advertisement
General Configuration Command Set
Setting User Accounts and Passwords
2.2.1.8
show system lockout
Use this command to display settings for locking out users after failed attempts to log in to the
system.
show system lockout
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Super User.
Example
This example shows how to display user lockout settings. In this case, device defaults have not been
changed:
Matrix(su)->show system lockout
Lockout attempts: 3
Lockout time:
Table 2-5
configured with the set system lockout command
Table 2-5 show system lockout Output Details
Output
Lockout attempts
Lockout time
2-34 Matrix NSA Series Configuration Guide
15 minutes.
provides an explanation of the command output. These settings are
What It Displays...
Number of failed login attempts allowed before a
read-write or read-only user's account will be disabled.
Number of minutes the default admin user account will be
locked out after the maximum login attempts.
(Section
2.2.1.9).
Advertisement
Chapters
Table of Contents
