2.2.3.20
set cli completion
Use this command to enable or disable the CLI command completion function. When enabled, this
allows you to complete a unique CLI command fragment using the keyboard spacebar.
set cli completion {enable | disable} [default]
Syntax Description
enable | disable
default
Command Defaults
If not specified, the status setting will not be maintained as the default.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable the CLI command completion function and maintain it as the
default setting:
Matrix(rw)->set cli completion enable default
Enables or disables the CLI command completion
function.
(Optional) Maintains the status for all future sessions.
Matrix NSA Series Configuration Guide
General Configuration Command Set
Setting Basic Device Properties
2-69