Show Banner Motd - Enterasys N Standalone (NSA) Series Configuration Manual

2.2.3.22

show banner motd

Use this command to show the banner message of the day that will display at session login.
show banner motd
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the banner message of the day:
Matrix(rw)->show banner motd
Not one hundred percent efficient, of course ... but nothing ever is.
-- Kirk, "Metamorphosis", stardate 3219.8
General Configuration Command Set
Setting Basic Device Properties
Matrix NSA Series Configuration Guide 2-71