How To Use This Guide; Related Documents - Enterasys Gold Distributed Forwarding Engine 4H4202-72 Hardware Installation Manual

How to Use This Guide

How to Use This Guide
This preface provides an overview of this guide and the DFE‐Gold Series manual set, and
a brief summary of each chapter; defines the conventions used in this document; and
instructs how to obtain technical support from Enterasys Networks. To locate information
about various subjects in this guide, refer to the following table:
For...
An overview of the DFE-Gold modules
Network requirements that must be met before
installing the DFE-Gold modules
Instructions to install the DFE-Gold module
hardware
Troubleshooting installation problems and
diagnosing network/operational problems using the
LANVIEW LEDs
Specifications, environmental requirements, and
physical properties of the DFE-Gold modules
Instructions to set the mode switches when
necessary and remove and replace DIMM and
DRAM SIMM memory

Related Documents

The manuals listed below can be obtained from the World Wide Web in Adobe Acrobat
Portable Document Format (PDF) at the following site:
http://www.enterasys.com/support/manuals
• Enterasys Matrix DFE‐Gold Series Configuration Guide provides information on how to
use the Command Line Interface to set up and manage the DFE‐Gold modules.
• Cabling Guide provides information on dB loss and cable specifications.
Unlike the Enterasys Matrix DFE‐Gold Series Configuration Guide, the Cabling Guide is
not listed alphabetically on the web site. Instead, it is listed under the Overview Guides
link.
xvi About This Guide
Refer to...
Chapter 1, Introduction
Chapter 2, Network Requirements
Chapter 3, Installation
Chapter 4, Troubleshooting
Appendix A, Specifications
Appendix B, Mode Switch Bank Settings
and Optional Installations