Completing The Installation Of A Dfe-Gold Module In An Existing System; Matrix Dfe Startup Screen Example (N7 Chassis) - Enterasys Gold Distributed Forwarding Engine 4H4202-72 Hardware Installation Manual

Completing the Installation
Figure 3-15
login: admin
Password:
M A T R I X N7 GOLD
Command Line Interface
Enterasys Networks, Inc.
50 Minuteman Rd.
Andover, MA 01810-1008 U.S.A.
Phone:
E-mail: support@enterasys.com
WWW:
(c) Copyright Enterasys Networks, Inc. 2003
Chassis Serial Number:
Chassis Firmware Revision: xx.xx.xx
Matrix N7(su)->
Completing the Installation of a DFE-Gold Module in an Existing
System
In an established DFE‐Gold module system,
• a DFE‐Gold module is already established as the management module,
• the passwords have already been set for various users,
• the system IP address is set, and
• other system parameters have been set.
When you install a new DFE‐Gold module into a system with an existing configured user
account, the current system settings in that account are already recognized by the new
DFE‐Gold module and it will operate accordingly.
If you need to change any settings, you can connect a terminal to the local console port as
described in "Connecting to COM Port for Local Management" on page 3‐20 to access
system management, or use a Telnet connection to access the DFE‐Gold module system
management as described in Chapter 3 of the Enterasys Matrix DFE‐Gold Series
Configuration Guide.
3-28 Installation

Matrix DFE Startup Screen Example (N7 Chassis)

+1 978 684 1000
http://www.enterasys.com
xxxxxxxxxxxx