Front Panel (Fp) - Ericsson RX8000 Series Reference Manual

3. Press Save to save the new settings or Edit to abandon the operation and
4. If YES is saved, inputs will be reset and the unit rebooted immediately.
3.5.1.4.2 1.4.2 Reset All Incl IP & Reboot
To access this function, press the
and the Edit key is lit:
FACTORY
1.4.2
To enable/disable the reset including IP network parameters:
1. Press the Edit key. The cursor appears below the NO.
2. Use the
3. Press Save to save the new settings or Edit to abandon the operation and
4. If YES is saved, inputs will be reset and the unit rebooted immediately.
When all necessary operations have been performed, press the
return to the Factory sub-menu.
3.5.1.5

1.5 Front Panel (FP)

To view the Lockout Front Panel (FP) Access menu, press the
following screen is displayed:
FP
1.5
3.5.1.5.1 1.5.1 Front Panel Lockout
To access the front panel lockout function, press the
Note:
The following screen is displayed:
FP
1.5.1
To enable/disable front panel lockout:
1. Press the Edit key. The cursor appears below the OFF.
EN/LZT 790 0005 R1A
return to the current setting.
|RESET ALL INCL IP & REBOOT
|NO
(Up) and
return to the current setting.
|LOCKOUT FRONT PANEL ACCESS
|
When enabled (set to ON) this function will disable the front panel controls
preventing further operation of any of the keys. The LCD will still continue to
display summary information screens. This feature may be disabled again
using the front panel controls.
|FRONT PANEL LOCKOUT
|OFF
(Down) key. The following screen is displayed
(Down) keys to toggle between YES and NO.
(Back) key to
(Down) key. The
(Forward) key.
Chapter 3
>
3-15