Usb Connector; Status Led; Lcd - Ericsson RX8000 Series Reference Manual

Figure 3.2 Front Panel Controls (RX8200)
3.3.1

USB Connector

This connector is for factory / service use only.
3.3.2

Status LED

This multi-coloured LED provides a visual indication of the summary status of the
unit. The LED can be any one of three colours:
•
•
•
3.3.3

LCD

A 2-line x 40-character back-lit dot-matrix Liquid Crystal Display (LCD) displays
various menus and settings. The menus and setting available will vary depending on
which receiver model is being used and which options have been enabled through
the purchase of a suitable license.
See Front Panel Menus on page 3-8 for details of all menus.
All menu is numbered to aid with navigation and are arranged in 6 main categories:
1. System: This menu includes user settings for: IP Control ports set-up, IP Control
2. Input: This menu is dependent on which Hardware Input Card Option is fitted to
EN/LZT 790 0005 R1A
CA SLOT
USB Connector
(Servicing Only)
Red (CRITICAL Error). Indicates that the unit has lost lock with the Transport
Stream.
Amber (MAJOR or MINOR Error). Indicates that the unit is locked to a
Transport Stream but an error has been detected signifying incorrect conditions
or system functioning.
Green (NO Errors). Indicates that the unit is locked to a Transport Stream and
correct conditions and system functioning are detected.
ports link status, Unit Build version details, Unit Electronic Serial Number.
the unit: Satellite Input Card, I/P Input Card, G.703 Input Card or 8VSB Input
Card.
LCD
Status LED
EDIT
LEFT UP
SAVE DOWN RIGHT
Chapter 3
3-5