Ericsson RX8000 Series Reference Manual page 83

To edit the Source IP Address 1:
1. Press the Edit key. The cursor appears below the first character of the displayed
2. Edit the parameter value as required using the
3. Press Save to save the new settings or Edit to abandon the operation and
3.5.3.2.6.3 2.2.6.3 UDP Port 1
To view and edit the UDP Port 1, press the
displayed:
STREAM 1
2.2.6.3
To edit the UDP Port 1 value:
1. Press the Edit key. The cursor appears below the first character of the displayed
2. Edit the parameter value as required using the
3. Press Save to save the new settings or Edit to abandon the operation and
3.5.3.2.6.4 2.2.6.4 Column Port 1
To view and edit the Column Port 1, press the
is displayed:
STREAM 1
2.2.6.4
To edit the Column Port 1 value:
1. Press the Edit key. The cursor appears below the first character of the displayed
2. Edit the parameter value as required using the
3. Press Save to save the new settings or Edit to abandon the operation and
EN/LZT 790 0005 R1A
value.
to select each digit in turn, and then using the
increment or decrement the digit.
return to the current setting.
|UDP PORT 1
|04000
value.
to select each digit in turn, and then using the
increment or decrement the digit.
return to the current setting.
|COLUMN PORT 1
|00000
value.
to select each digit in turn, and then using the
increment or decrement the digit.
return to the current setting.
(Back) and
(Up) and (Down) keys to
(Down) key. The following screen is
(Back) and
(Up) and (Down) keys to
(Down) key. The following screen
(Back) and
(Up) and (Down) keys to
Chapter 3
(Forward) keys
(Forward) keys
(Forward) keys
3-35