Construction; Front Panel; Figure 1.4 Role Of The Decoder - Ericsson RX8000 Series Reference Manual

Chapter 1
The Decoder is configured to select a single video Service and other audio/data
components from the multiple Services on the incoming Transport Stream and
present them at the output.

Figure 1.4 Role of the Decoder

Note:
1.5

Construction

The RX8000 Receiver is constructed using a screened self-ventilated modular
system. All operational inputs and outputs are via rear-panel connectors. The unit
may be operated freestanding or mounted in a 19-inch rack.
1.6

Front Panel

The user interface for the Front Panel consists of an alphanumeric Liquid Crystal
Display, pushbuttons, and a status LED that are used to set-up, control and monitor
the unit.
Various menu screens can be navigated on the LCD using the pushbuttons, which
allow you to select and modify key parameters and features of the unit.
Full details of the front panel menus and information on the use of these controls is
given in Chapter 3, Front Panel Control.
1-20
G.703 input may also be used to interface to telco infrastructure.
EN/LZT 790 0005 R1A