Ericsson RX8000 Series Reference Manual page 81

2.2.4.7
To edit the MDI Media Loss Rate:
1. Press the Edit key. The cursor appears below the first character of the displayed
2. Edit the parameter value as required using the
3. Press Save to save the new settings or Edit to abandon the operation and
This is the last of the Setup screens. To return to the top level Setup screen, press
the
3.5.3.2.5 2.2.5 I/P Port/ Use Input Ports
To view and edit the I/P Input Port in use, press the
screen is displayed:
I/P PORT
2.2.5
To change the input port:
1. Press the Edit key. The cursor appears below the first character of the displayed
2. Use the
3. Press Save to save the new settings or Edit to abandon the operation and
3.5.3.2.5.1 2.2.5.1 Auto Revert Delay
To view and edit the Auto Revert Delay, press the
screen is displayed:
I/P PORT
2.2.5.1
To edit the Auto Revert Delay:
1. Press the Edit key. The cursor appears below the first character of the displayed
2. Edit the parameter value as required using the
EN/LZT 790 0005 R1A
|0 .004
option.
to select each digit in turn, and then using the
increment or decrement the digit.
return to the current setting.
(Back) key.
|USE INPUT PORTS
|Port 1
option.
(Up) and
Auto options.
return to the current setting.
|AUTO REVERT DELAY
|00000
value.
to select each digit in turn, and then using the
increment or decrement the digit.
(Down) keys to toggle between the Port 1, Port 2 and
(Back) and (Forward) keys
(Up) and (Down) keys to
(Down) key. The following
(Forward) key. The following
(Back) and (Forward) keys
(Up) and (Down) keys to
Chapter 3
>
3-33