Ericsson RX8000 Series Reference Manual page 80

Chapter 3
2. Edit the parameter value as required using the
3. Press Save to save the new settings or Edit to abandon the operation and
3.5.3.2.4.5 2.2.4.5 Network Util 2 (Max Value)
To view and edit the Network Util 2, press the
is displayed:
SETUP
2.2.4.5
To edit the Network Util 2:
1. Press the Edit key. The cursor appears below the first character of the displayed
2. Edit the parameter value as required using the
3. Press Save to save the new settings or Edit to abandon the operation and
3.5.3.2.4.6 2.2.4.6 MDI Delay Factor (Max Value)
To view and edit the MDI Delay Factor, press the
screen is displayed:
SETUP
2.2.4.6
To edit the MDI Delay Factor:
1. Press the Edit key. The cursor appears below the first character of the displayed
2. Edit the parameter value as required using the
3. Press Save to save the new settings or Edit to abandon the operation and
3.5.3.2.4.7 2.2.4.7 MDI Media Loss Rate (Max Value)
To view and edit the MDI Media Loss Rate, press the
screen is displayed:
SETUP
3-32
to select each digit in turn, and then using the
increment or decrement the digit.
return to the current setting.
|NETWORK UTIL 2 (MAX VALUE)
|100
option.
to select each digit in turn, and then using the
increment or decrement the digit.
return to the current setting.
|MDI DELAY FACTOR (MAX VALUE)
|50.000
option.
to select each digit in turn, and then using the
increment or decrement the digit.
return to the current setting.
|MDI MEDIA LOSS RATE (MAX FACTOR)
(Back) and (Forward) keys
(Up) and (Down) keys to
(Down) key. The following screen
(Back) and (Forward) keys
(Up) and (Down) keys to
(Down) key. The following
(Back) and (Forward) keys
(Up) and (Down) keys to
(Down) key. The following
EN/LZT 790 0005 R1A