System; Network - Ericsson RX8000 Series Reference Manual

Chapter 3
3.5.1

1 System

Shortly after switch-on, the Status LED will turn green and arrow keys will be lit
depending on which further menus are available. The following System menu
screen is displayed:
SYSTEM
1
The functions within the System menu are used to set various network parameters,
IP and MAC addresses and to view Build, Unit Serial Number and Factory
parameter information.
3.5.1.1

1.1 Network

To access the Network menu from the System menu, press the
The following screen is displayed:
NETWORK
1.1
3.5.1.1.1 1.1.1 IP1
To access and edit the IP1 menu, press the
is displayed and the Edit key is lit:
IP1
1.1.1
To edit the IP address:
1. Press the Edit key. The cursor appears below the first character of the IP
2. Edit the address as required using the
3. Press Save to save the new settings or Edit to abandon the operation and
To edit the Subnet address:
1. Press the Edit key if not already in Edit mode. The cursor appears below the
2. Press the
3. Edit the address as required using the
3-10
|SYSTEM
|
|Network Settings
|IP, Subnet, MAC
|IP:
|Subnet: 255.255.000.000
address.
each digit in turn, and then using the
decrement the digit.
return to the current setting.
first character of the IP address.
(Forward) key repeatedly to move the cursor to the end of the IP
address and down on to the Subnet address.
each digit in turn, and then using the
decrement the digit.
(Forward) key. The following screen
169.254.245.077
(Back) and
(Up) and
(Back) and
(Up) and
>
(Forward) key.
>
(Forward) keys to select
(Down) keys to increment or
(Forward) keys to select
(Down) keys to increment or
EN/LZT 790 0005 R1A