The MASTR® II Station Auxiliary Receivers are available OFF switch is provided on the regulator board. Another LED for mounting in MASTR II Base Stations or in MASTR II on the front panel indicates carrier activity. The receiver chas- Multiple Receiver Stations. The Auxiliary Receiver consists of sis swings out for servicing.
Antenna Jack J2402. the oscillator frequency to 1000 Hz, and adjust the level In MASTR II remote applications, the VOL/SQ HI is applied to the base of Q801, causing Q801 to conduct. The to produce the same level recorded at the voting selec- coupled through the LINE DRIVER circuits to the remote voltage at pin 3 of U801 is the regulated 10-volts output.
MASTR II Base Station Auxiliary Receiver applications. 3000 Hz, 3000 Hz referenced to the 1000 Hz level. Gain Options 9703 and 9704 are used with MASTR II Multiple Re- The Channel Guard filter attenuates frequencies below The Voting Tone Board is used to provide tone signaling control R12 is adjusted at the factory and should require no ceiver Stations.
SCHEMATIC DIAGRAM LBI-30766 NOTES: 1. JUMPER FROM H1 TO TO H2 NOT PRESENT WHEN THERE IS NO LOAD, OR SPEAKER CONNECTED TO THE SPEAKER OUTPUT LEADS. (J2401-9,10). 2. WHEN TONE FILTER PL19C328328G1,3 IS PRE- SENT (IN TONE CONTROL SYSTEMS) R937 IS RE- MOVED.