Ericsson RX8000 Series Reference Manual page 97

6. Press Save to save the new settings or Edit to abandon the operation and
To edit the user STD:
1. Press the Edit key. The cursor appears below the first character of the current
2. Use the
3. Press Save to save the new settings or Edit to abandon the operation and
3.5.6.2.3 3.2.3 Delay Mode
To view and edit the Delay Mode, press the
displayed and the Edit key is lit:
VIDEO
3.2.3
To edit the Delay Mode:
1. Press the Edit key. The cursor appears below the first character of the current
2. Use the
3. Press Save to save the new settings or Edit to abandon the operation and
3.5.6.2.4 3.2.4 RX Delay
To view and edit the RX Delay, press the
displayed and the Edit key is lit:
VIDEO
3.2.4
This screen shows the extra delay added (in milliseconds) on top of the standard or
low delay selected in screen 3.2.3 Delay Mode, above.
To edit the RX delay:
1. Press the Edit key. The cursor appears below the first character of the current
2. Edit the parameter value as required using the
EN/LZT 790 0005 R1A
return to the current setting.
STD selection.
(Up) and
MPEG-2 options.
return to the current setting.
|DELAY MODE: STANDARD
|
selection.
(Up) and
LOW (this option is only available if RX8XXX/SWO/LDELAY is enabled) options.
return to the current setting.
|RX DELAY 4:2:0: 000
|
value.
to select each digit in turn, and then using the
increment or decrement the digit.
(Down) keys to toggle between the MPEG-4 AVC and
(Down) key. The following screen is
(Down) keys to toggle between the STANDARD and
(Down) key. The following screen is
(Back) and (Forward) keys
(Up) and (Down) keys to
Chapter 3
3-49