Ts Feed Selection - Ericsson RX8000 Series Reference Manual

Note:
3. Use the
4. Press Save to save the new settings or Edit to abandon the operation and
3.5.8.1.2 5.1.2 Output 3
To edit the output types for output 3 (dependent on model and option licences
obtained), press the
Edit key is lit:
OUTPUT
5.1.2
To edit the output 3 type:
1. Press the Edit key. The cursor appears at the start of the current option.
2. Using the
Note:
3. Press Save to save the new settings or Edit to abandon the operation and
Press the
3.5.8.2

5.2 TS Feed Selection

To edit the Transport Stream (TS) Feed Selection, press the
following screen is displayed and the Edit key is lit:
OUTPUT
5.2
Selecting the Descrambled option will provide a Transport Stream that is post
descramble block. Selecting the Input option will provide a Transport Stream that is
before the descramble block.
To edit the TS feed selection:
1. Press the Edit key. The cursor appears at the start of the current option.
2. Using the
3. Press Save to save the new settings or Edit to abandon the operation and
EN/LZT 790 0005 R1A
Selecting AUTO will output SD-SDI for SD material and HD-SDI for HD
material.
(Back) and
TWO.
return to the current setting.
(Forward) key. The following screen is displayed and the
|OUTPUT THREE
|
(Up) and
SD-SDI, AUTO and HD-SDI (depending on model and option licences obtained).
Selecting AUTO will output SD-SDI for SD material and HD-SDI for HD
material.
return to the current setting.
(Back) key to return to the Output Selection menu.
|TS FEED SELECTION
| Descrambled
(Up) and
Input options.
return to the current setting.
(Forward) keys to toggle between OUTPUT ONE and
: SD-SDI
(Down) keys toggle between the available options: ASI,
(Down) keys to toggle between the Descrambled and
Chapter 3
(Down) key. The
3-57