Asi Out Connector (Rx8310/15/20 Only) - Ericsson RX8000 Series Reference Manual

The receiver provides DC power (see Chapter 3, Front Panel Control for details of
menu option) via the active L-band input connector to drive an LNB. Do not connect
equipment other than an LNB to this connector. Failure to do this may result in
damage to the external equipment.
The F-type connector is not suitable for repeated connection and disconnection.
When intended for use in this way, fit a sacrificial connector and connect to it.
Table 2.3
Item
Connector type
Connector designation
LNB Power Supply
Pin-outs
2.7.3

ASI OUT Connector (RX8310/15/20 only)

The unit provides two coaxial ASI digital outputs
depending on the user selectable configuration.
Table 2.4
Item
Connector type
Connector designation
Pin-outs
EN/LZT 790 0005 R1A
RF IN Connector
Specification
F-type 75 Ω female socket
RF IN 1
RF IN 2
RF IN 3
RF IN 4
See Cautions! above.
Centre Input
Shield Ground/Chassis
ASI OUT Connector
Specification
BNC 75 Ω female socket
ASI OUT 1
ASI OUT 2
Centre Output
Shield Ground/Chassis
Cautions!
Chapter 2
ASI OUT
2-11