Front Panel Control; Introduction; Receiver Front Panel; Using The Front Panel Controls - Ericsson RX8200 User Manual

Advanced modular receiver software version 4.3.2
Hide thumbs Also See for RX8200:
Table of Contents

Advertisement

4

Front Panel Control

4.1

Introduction

The Front Panel display and keypad may be used to configure, control and monitor
the receiver when an external control system is not used.
Note:
4.2

Receiver Front Panel

Figure 2
4.3

Using the Front Panel Controls

4.3.1
Status LED
This multi-colored LED provides a visual indication of the summary status of the
unit. The LED can be any one of three colors:
EN/LZT 790 0009 R1A
2011-03-30
A list of receiver user settings that may be viewed or changed via the front
panel and those that may be viewed or changed via the external web
browser interface can be found in the Reference Guide.
CA SLOT
USB Connector
(Servicing Only)
Front Panel LEDs and Pushbuttons
Red (CRITICAL Error). Indicates that the unit has lost lock with the Transport
Stream.
Amber (MAJOR or MINOR Error). Indicates that the unit is locked to a
Transport Stream but an error has been detected signifying incorrect conditions
or system functioning.
Green (NO Errors). Indicates that the unit is locked to a Transport Stream and
correct conditions and system functioning are detected.
LCD
Status LED
Front Panel Control
EDIT
LEFT
UP
SAVE
DOWN
RIGHT
17 (44)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents