Ericsson RX8000 Series Reference Manual page 69

3. Press Save to save the new settings or Edit to abandon the operation and
3.5.2.2.2.8 2.2.2.8 LNB Power OP
To view and edit the current Source 1 LNB power output settings, press the
(Down) key. The following screen is displayed and the Edit key is lit:
SOURCE 1
2.2.2.8
To enable/disable the LNB Power Op:
1. Press the Edit key. The cursor appears below the first character of the current
2. Use the
3. Press Save to save the new settings or Edit to abandon the operation and
3.5.2.2.2.9 2.2.2.9 LNB Power Level
To view and edit the current Source 1 LNB Power Level, press the
The following screen is displayed and the Edit key is lit:
SOURCE 1
2.2.2.9
To edit the LNB power level:
1. Press the Edit key. The cursor appears below the first character of the current
2. Use the
3. Press Save to save the new settings or Edit to abandon the operation and
3.5.2.2.2.10 2.2.2.10 LNB 22KHz
To enable or disable the Source 1 LNB 22KHz facility, press the
following screen is displayed and the Edit key is lit:
SOURCE 1
2.2.2.10
To enable/disable the LNB 22KHz facility:
1. Press the Edit key. The cursor appears below the first character of the current
2. Use the
EN/LZT 790 0005 R1A
return to the current setting.
|LNB POWER OP
|DISABLE
setting.
(Up) and
return to the current setting.
|LNB POWER LEVEL
|13V (VERT)
setting.
(Up) (Down) keys to set the required value.
return to the current setting.
|LNB 22KHz
|ENABLE
setting.
(Up) (Down) keys to select ENABLE or DISABLE.
(Down) keys to select ENABLE or DISABLE.
Chapter 3
(UNLOCKED)
(Down) key.
(UNLOCKED)
(Down) key. The
(UNLOCKED)
3-21