Ericsson RX8000 Series Reference Manual page 78

Chapter 3
This is the last of the Network 1 screens. To return to the top level Network 1 screen
press the
3.5.3.2.3 2.2.3 Network 2
From the Network 1 screen 2.2.2, press the
displayed.
NETWORK 2 |IP ADDRESS 2
2.2.3
The Network address 2 may be edited and all of the Network 2 parameters viewed
and edited (where possible) as described in Section 3.5.3.2.2. When complete,
press the
3.5.3.2.4 2.2.4 Setup/MAC Mode
To view and edit the MAC Mode, press the
displayed:
SETUP
2.2.4
To change the MAC Mode:
1. Press the Edit key. The cursor appears below the first character of the displayed
2. Use the
3. Press Save to save the new settings or Edit to abandon the operation and
3.5.3.2.4.1 2.2.4.1 De-Jitter Buffer Level
To view and edit the De-Jitter Buffer Level, press the
screen is displayed:
SETUP
2.2.4.1
To edit the De-Jitter Buffer Level:
1. Press the Edit key. The cursor appears below the first character of the displayed
2. Edit the parameter value as required using the
3-30
(Back) Key.
|000.000.000.000
(Back) Key to return to the top level Network 2 screen.
|MAC MODE
|Same
option.
(Up) and
options.
return to the current setting.
|DE-JITTER BUFFER LEVEL
|00500
option.
to select each digit in turn, and then using the
increment or decrement the digit.
(Down) key. The following screen is
(Down) key. The following screen is
(Down) keys to toggle between the Same and Different
(Forward) key. The following
(Back) and (Forward) keys
(Up) and (Down) keys to
EN/LZT 790 0005 R1A
>
>