Ericsson RX8000 Series Reference Manual page 94

Chapter 3
SETUP
2.2.2.7
To select the ATM Header Err Ignore value:
1. Press the Edit key. The cursor appears below the displayed type (FALSE shown
2. Use the
3. Press Save to save the new settings or Edit to abandon the operation and
4. Use the
To select the ATM VPI value:
1. Press the Edit key. Press the
2. Use the
3. Press Save to save the new settings or Edit to abandon the operation and
3.5.5.2.2.8 2.2.2.8 Sync CNT To Lock/Sync Miss Sample Size
To access the Sync CNT To Lock/Sync Miss Sample Size Setup function, press the
SETUP
2.2.2.8
To select the Sync CNT To Lock value:
1. Press the Edit key.
2. Use the
3. Press Save to save the new settings or Edit to abandon the operation and
To select the Sync Miss Sample Size value:
1. Press the Edit key. Press the
2. Use the
3. Press Save to save the new settings or Edit to abandon the operation and
3-46
|ATM HEADER ERR IGNORE
|ATM VPI
above).
(Up) and
TRUE and FALSE (dependent on model and option licences obtained).
return to the current setting.
(Forward) and
Ignore and ATM VPI inputs.
current value.
(Up) and
return to the current setting.
(Down) key. The following screen is displayed:
|SYNC CNT TO LOCK
|SYNC MISS SAMPLE SIZE
(Up) and
return to the current setting..
current value.
(Up) and
return to the current setting.
(Down) keys to toggle between the available options:
(Back) keys to toggle between the ATM Header Err
(Forward) key until cursor appears below the
(Down) keys until the required value is obtained.
(Down) keys until the required value is obtained.
(Forward) key until cursor appears below the
(Down) keys until the required value is obtained.
FALSE
017
008
030
EN/LZT 790 0005 R1A