Ericsson RX8000 Series Reference Manual page 102

Chapter 3
DIR
4.2.3
3.5.7.2.4 4.2.4 Manuf ID
To view the manufacturer, model and hardware identifier values, press the
(Down) key. The following screen is displayed:
DIR
4.2.4
3.5.7.2.5 4.2.5 Download Status
To view the Download Status, press the
displayed:
DIR
4.2.5
3.5.7.2.6 4.2.6 Enter New PIN
To enter a new local lockout PIN, press the
displayed and the Edit key is lit:
DIR
4.2.6
This allows the user to either change the PIN required to access the front panel
when not in local mode or access the front panel via the previously set PIN. This
depends on receiver mode.
To enter a new PIN:
1. Press the Edit key. The cursor appears below the first character of the current
2. Edit the parameter value as required using the
3. Press Save to save the new settings or Edit to abandon the operation and
3.5.7.2.7 4.2.7 Reset PIN
To reset an existing local lockout PIN, press the
screen is displayed and the Edit key is lit:
DIR
4.2.7
3-54
|UNIQUE HARDWARE ID
|34390968634
|MANUF ID DE
|MODEL ID 1D
|DOWNLOAD STATUS
|IDLE
|ENTER NEW PIN
|****
selection.
to select each digit in turn, and then using the
increment or decrement the digit.
return to the current setting.
|RESET PIN
|*************
HW TYPE 82
(Down) key. The following screen is
(Down) key. The following screen is
(Back) and
(Up) and
(Down) key. The following
(Forward) keys
(Down) keys to
EN/LZT 790 0005 R1A