1.3 Usn; Factory - Ericsson RX8000 Series Reference Manual

Chapter 3
3.5.1.2.8 1.2.8 422 FW (Option Card)
To view the 4:2:2 Firmware (FW) version (dependent on model and option licences
obtained), press the
VERSIONS
1.2.8
3.5.1.2.9 1.2.9 422 SW (Option Card)
To view the 4:2:2 Software (SW) version (dependent on model and option licenses
obtained), press the
VERSIONS
1.2.9
This is the last of the Version screens. To return to the Build menu, press the
(Back) key.
3.5.1.3

1.3 USN

To view the Unit Serial Number (USN) of the equipment, press the
The following screen is displayed:
USN
1.3
3.5.1.4

1.4 Factory

The Factory menu allows the setting of equipment parameters to default values and
various equipment rebooting options. To access the Factory menu, press the
(Down) key. The following screen is displayed:
FACTORY
1.4
3.5.1.4.1 1.4.1 Reset All Excl IP & Reboot
To access this function, press the
displayed and the Edit key is lit:
FACTORY
1.4.1
To enable/disable the reset excluding IP network parameters:
1. Press the Edit key. The cursor appears below the NO.
2. Use the
3-14
(Down) key. The following screen is displayed:
|422 FW :---
|
(Down) key. The following screen is displayed:
|422 SW :---
|
|SERIAL NUMBER
|01436
|Reset Params to Defaults
|incl/excl IP params & reboot
|RESET ALL EXCL IP & REBOOT
|NO
(Up) and (Down) keys to toggle between YES and NO.
(Forward) key. The following screen is
(Down) key.
>
EN/LZT 790 0005 R1A